HHR L4-2.4L (2010)
Important: If you are installing a new lock cylinder, refer to Key and Lock Cylinder Coding (1st Design) (See: Procedures/Key and Lock
Cylinder Coding (1st Design))Key and Lock Cylinder Coding (2nd Design) (See: Procedures/Key and Lock Cylinder Coding (2nd Design)).
1. Position the lock cylinder in the run position. Insert the cylinder into the lock housing.
2. Rotate the lock cylinder in the housing. Verify proper rotation.
3. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Negative/Service
and Repair/Battery Negative Cable Disconnection and Connection).