HHR L4-2.4L (2010)
1. Position the electronic power steering motor control module and bracket (2) together.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the electronic power steering motor control module bolts (1) and tighten to 11.5 Nm (102 lb in).
3. Install the electronic power steering motor control module and bracket to the vehicle.
4. Install the electronic power steering motor control module bracket bolts (1) and tighten to 11.5 Nm (102 lb in).
5. Connect the electronic power steering motor control module electrical connectors.