chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Front Wheel Drive Shaft Seal and Output Shaft Sleeve Replacement - Left Side|Page 4647 > < Front Wheel Drive Shaft Seal and Output Shaft Sleeve Replacement - Left Side|Page 4645

HHR L4-2.4L (2010)

Page 4
background image

7. Install two NEW snap rings on the stub shaft.
8. Apply grease to the output shaft splines.

Note:  J 41102-1A  must be used in order to install the axle seal to the correct depth.

9. Install a NEW seal (1). Use the J 41102-1A   (3) with J 8092   (2). Lubricate the seal lip with transmission fluid.

Front Wheel Drive Shaft Seal and Output Shaft Sleeve Replacement - Left Side|Page 4647 > < Front Wheel Drive Shaft Seal and Output Shaft Sleeve Replacement - Left Side|Page 4645