HHR L4-2.4L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the rear transaxle mount to frame bolts.
Tighten the bolts to 60 Nm (44 lb ft).
Note:
*
Rotate the rear transaxle mount heat shield clockwise until the tab is seated on the mount bracket.
*
The front and rear transmission mounts must be allowed to settle with the thru bolts loosened.
4. Loosen the front transaxle mount thru bolt but do not remove the bolt.