chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Arming and Disarming|Page 10822 > < Arming and Disarming|Page 10820
Page 4
background image

10. Reinstall door water deflector. 
11. Install the LH door trim panel. 

12. Install the AIRBAG (1) and SDM (2) fuses into the BCM fuse center. 
13. Install the BCM fuse center cover. 
14. Use caution while reaching in and turn the ignition switch to the ON position. The AIR BAG indicator will flash then turn OFF. 
15. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System

Check - Vehicle.  See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures

Arming and Disarming|Page 10822 > < Arming and Disarming|Page 10820