Impala V6-3.4L VIN E (2000)
Heater Hose: Service and Repair
Heater Hoses Replacement
REMOVAL PROCEDURE
Tools Required
J 38185 Hose Clamp Pliers
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
2. Use J 38185 in order to position aside the heater hose inlet and/or outlet clamp.
3. Disconnect the heater inlet hose and/or the outlet hose from the inlet and/or outlet pipe.
4. Use J 38185 in order to position aside the heater core inlet and/or outlet hose clamp.
5. Disconnect the heater inlet hose and/or the outlet hose from the heater core.
6. Remove the heater inlet hose and/or the outlet hose.
INSTALLATION PROCEDURE