Impala V6-3.4L VIN E (2000)
3. Install the battery positive cable (9) to the starter motor BAT terminal.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the starter motor BAT terminal nut (8).
Tighten
Tighten the starter motor switch BAT terminal nut (8) to 10 N.m (89 lb in).
5. Lower the vehicle.
6. Install the battery positive cable (2) and the battery positive cable junction block lead nut (1) to the underhood accessory wiring junction block.
Tighten
Tighten the battery positive cable junction block lead nut (1) to 15 N.m (11 lb ft).
