Impala V6-3.4L VIN E (2000)
1. Position the steering wheel on the steering column.
2. Route the SIR connector through the steering wheel.
3. Align the scribe mark on the steering wheel with the slash mark on the steering shaft.
4. Install the steering wheel.
Notice: Refer to Fastener Notice in Service Precautions
5. Install the steering shaft nut.
Tighten the steering shaft nut to 45 Nm (33 ft. lbs.).
6. Install the Inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Air Bags and Seat Belts
7. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts
8. Inspect the operation of the following components:
-
The horn.
-
The steering wheel.
-
The steering wheel controls.
