Impala V6-3.5L VIN N (2006)
A/C Coupler O-ring: Service and Repair
O-Ring Replacement
O-RING REPLACEMENT
REMOVAL PROCEDURE
1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.
2. Remove the O-ring seals from the A/C refrigerant component.
3. Inspect the O-ring seals for signs of damage.
4. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
5. Cap or tape the A/C refrigerant components.
IMPORTANT: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
6. Discard the O-ring seals.
INSTALLATION PROCEDURE
1. Inspect the new O-ring seals for any sign or cracks, cuts, or damage. Replace if necessary.
2. Remove the cap or tape from the A/C refrigerant components.
3. Using a lint-free clean, dry cloth, carefully clean the sealing surfaces of the A/C refrigerant components.
4. Lightly coat the new O-ring seals with mineral base 525 viscosity refrigerant oil.
IMPORTANT: DO NOT allow any of the mineral base 525 viscosity refrigerant oil on the new O-ring seal to enter the refrigerant system.
5. Carefully slide the new O-ring seals onto the A/C refrigerant component.
IMPORTANT: DO NOT reuse O-ring seals.