Impala V6-3.5L VIN N (2006)
Remove the left side transmission mount lower nuts from the frame.
Remove the right side engine mount lower nuts from the frame.
Support and raise the transmission. Raise the transmission about 51-76 mm (2-3 in).
Support the rear of the frame using an adjustable jackstand.
Remove the rear frame bolts from frame.
Lower the rear of the frame no more than 76 mm (3 in).
Remove the right side engine mount bracket bolts.
Remove the right side engine mount and bracket from the vehicle.
Disconnect the power steering cooler pipe/hose from the gear.
Remove the power steering cooler pipe/hose clamp from the return line.
Disconnect the power steering cooler pipe/hose from the return line.
