chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1443 > < Diagram Information and Instructions|Page 1441
Page 1
background image

Air Bag Control Module: Description and Operation

INFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE (SDM)

The inflatable restraint sensing and diagnostic module (SDM) is a microprocessor and the control center for the SIR System. This SDM has 2 fused
power inputs; one fuse is for the battery voltage and the other fuse is for the ignition voltage. The SDM uses vehicle battery voltage as its main power
input. The SDM then uses the vehicles Serial Data Communication line and the ignition voltage logic input for enabling or disabling the SIR deployment
loops. The SDM contains internal sensors along with several external sensors, if equipped, mounted at strategic locations on the vehicle. In the event of a
collision, the SDM compares the signals from the internal and external sensors to a value stored in memory. When the generated signals exceed the
stored value, the SDM will cause current to flow through the appropriate deployment loops to deploy the air bags or seat belt pretensioners. If the force
of the impact is not sufficient to warrant inflator module deployment, the SDM may still deploy the seat belt pretensioners. The SDM records the SIR
system status when a deployment occurs and turns the AIR BAG indicator located in the instrument panel cluster (IPC) ON. As soon as three distinct
deployment commands (representing different events) have been issued to any belt pretensioner, or the SDM commands any front and side air bag to
deploy once, the SDM shall be considered to not be reusable. The SDM performs continuous diagnostic monitoring of the SIR system electrical
components and circuitry when the ignition is turned ON. If the SDM detects a malfunction, a DTC will be stored and the SDM will command the AIR
BAG indicator ON, notifying the driver that a malfunction exist. In the event that ignition positive voltage is lost during a collision, the SDM maintains a
23-volt loop reserve (23 VLR) for deployment of the air bags. It is important when disabling the SIR system for servicing or rescue operations to allow
the 23 VLR to dissipate, which could take up to 1 minute.

Diagram Information and Instructions|Page 1443 > < Diagram Information and Instructions|Page 1441