Impala V6-3.5L VIN N (2006)
4. Open the hood and locate the underhood fuse center (1) on right/passenger shock tower.
IMPORTANT: This sensing and diagnostic module (SDM) has 2 fused power inputs. To ensure there is no unwanted SIR deployment, personal
injury, or unnecessary SIR system repairs, remove both AIR BAG (IGN) and AIR BAG (BATT) fuses. With the AIR BAG fuses removed and the
ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not indicate an SIR system
malfunction.
5. Lift the cover for the underhood fuse center.
6. Locate and remove the Air Bag Fuse from the underhood fuse center.
7. Pull back the carpet from the front lower right/passenger door pillar to expose the interior fuse center (1). Refer to Junction Block Replacement -
Accessory Wiring.
8. Remove the cover then locate and remove the Air Bag Fuse from the interior fuse center.
