Impala V6-3.5L VIN N (2006)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder Case Replacement
Ignition Lock Cylinder Case Replacement
Removal Procedure
1. Caution:
Refer to Restraint System Caution in Service Precautions.
Disable the SIR system. Refer to Restraint System Disabling and Enabling Zone 3.
2. Remove the ignition lock cylinder.
3. Remove the ignition switch.
4. Remove the steering column tilt head components.
5. Remove the turn signal switch housing.
6. Remove the turn signal and multifunction switch assembly only.