Impala V6-3.5L VIN N (2006)
5.
Remove the left side engine mount lower nuts from the frame.
6.
Remove the left side transmission mount lower nuts from the frame.
7.
Remove the right side engine mount lower nuts from the frame.
8.
Support and raise the transmission. Raise the transmission about 51-76 mm (2-3 in).
9.
Support the rear of the frame (cradle) using an adjustable jackstand.
10.
Remove the rear frame bolts from frame.
Notice:
To avoid part damage, do NOT lower the rear frame (cradle) more than 76 mm (3 in).
11.
Lower the rear frame (cradle) no more than 76 mm (3 in).
