Impala V6-3.5L VIN N (2006)
7. Pull back the carpet from the front lower right/passenger door pillar to expose the interior fuse center (1). Refer to Junction Block Replacement -
Accessory Wiring.
8. Remove the cover then locate and remove the Air Bag Fuse from the interior fuse center.
9. Remove the radiator upper air baffle and deflector and locate the left and right front end sensor (1, 4).
10. Remove the connector position assurance (CPA) (3, 6) from both front end sensors connector (2, 5).
11. Remove both front end sensor connectors (2, 5) from each front end sensor (1, 4).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
