Impala V6-3.5L VIN N (2006)
1. Important:
Once the steering column support assembly has been staked 3 times, it must be replaced.
Install the steering column support assembly (1) to the steering column jacket assembly (3).
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the 4 new steering column support TORX screws (2).
Tighten the 4 steering column support TORX screws to 17 Nm (13 ft. lbs.).
3. Lubricate the centering sphere (1) with GM P/N 12345718 (Canadian P/N 10953516).
4. Install the centering sphere (1) and the joint preload spring (2) into J 41688.
