Impala V6-3.5L VIN N (2006)
Control Arm Bushing: Service and Repair
Lower Control Arm Bushings Replacement (Vertical)
Lower Control Arm Bushings Replacement (Vertical)
Tools Required
^
J 21474-01 Control Arm Bushing Set
^
J 21474-271/2 Inch Puller Bolt Thrust Bearing
^
J 21474-2Bushing Installer Remover
^
J 21474-4Nut
^
J 21474-13 Control Arm Bushing Installer
^
J 23444-A High Pressure Lubricant
^
J 34126 Driven Sprocket Support Bearing Installer
^
J 35379 Front Knuckle Support
Removal Procedure
1. Remove the lower control arm.
2. Secure the lower control arm in a vice.
3. Mark the lower control arm along the flat edge of the bushing flange.
4. Important:
Apply J 23444-A or equivalent to the threads of J 21474-27.
Assemble the following bushing removal tools as shown:
1
J 21474-27
2
J 21474-13
3
J 34126
4
J 35379
5
J 21474-2
6
J 21474-4
5. Tighten J 21474-4.