Impala V6-3.5L VIN N (2006)
Shift Solenoid: Service and Repair
1-2 Shift Solenoid Valve Replacement
1-2 Shift Solenoid Valve Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect the 1-2 shift solenoid electrical connector.
3. Remove the 1-2 shift solenoid retaining clip (314D)
4. Remove the 1-2 shift solenoid (315A).
Installation Procedure
1. Install the 1-2 shift solenoid (315A).
2. Install the 1-2 shift solenoid retaining clip (314D).
3. Connect the 1-2 shift solenoid electrical connector.
4. Install the case side cover.
