Impala V6-3.8L SC VIN 1 (2005)
Speaker: Service and Repair
Front Door
SPEAKER REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Remove the screws from both speakers.
IMPORTANT: The speakers are to be replaced as a set.
3. Disconnect the electrical connector from the speaker housing.
4. Remove the speakers.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the speaker. Position the speaker to the door.
2. Install the speakers.
3. Install the speaker screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the speaker screws to 2 N.m (18 lb in).
4. Install the front door trim panel.
IMPORTANT: Due to the lower trim fasteners close proximity to the speaker cone, the door trim must be installed with care.