Impala V6-3.8L SC VIN 1 (2005)
2. Install the push-in retainers to the rear bumper fascia.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the nuts to the rear bumper fascia outer retainers.
Tighten the rear bumper fascia outer retainer nuts to 6 N.m (53 lb in).
4. Install the bolts to the rear bumper fascia outer retainers.
Tighten the rear bumper fascia outer retainer bolts to 6 N.m (53 lb in).
5. Install the nut to the rear bumper fascia outer retainer.
Tighten the rear bumper fascia outer retainer nut to 6 N.m (53 lb in).
6. Install the rear bumper fascia splash shield.
7. Pull back the rear compartment trim panel. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.
8. Install the license plate lamp.