Impala V6-3.8L SC VIN 1 (2005)
3. Install the rear bumper fascia splash shield bolt.
Tighten the rear bumper fascia splash shield bolts to 2 N.m (18 lb in).
4. Install the rear bumper fascia splash shield screws.
Tighten the rear bumper fascia splash shield nut to 2 N.m (18 lb in).
5. Install the rear bumper fascia splash shield push-in retainers.
6. Using a new plastic rivit,install the plastic rivit to the rear fascia extension corner to splash shield if equipped.
7. Install the rear bumper fascia extension screw to the rear fascia extension corner to splash shield if equipped.