Impala V6-3.8L SC VIN 1 (2005)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Water Deflector Replacement
Plenum Chamber Water Deflector Replacement
Removal Procedure
1. Open the hood.
2. Remove the right side of the air inlet grille.
3. Remove the plenum chamber deflector from the pinch-weld flange, by lifting up and out.
Installation Procedure
1. Install the plenum chamber deflector to the pinch-weld flange.
2. Install the right side of the air inlet grille.
3. Close the hood.