Impala V6-3.8L SC VIN 1 (2005)
8. Remove the hole plug to access to one of the two bolts that attach the outer door handle.
9. Remove the front door outside door handle from the door.
10. Remove the front door outside door handle rod from the handle.
Installation Procedure
1. Install the lockcylinder retainer clip to door handle.
2. Install the front door handle rod to the door handle.
3. Install the front outside door handle to the door.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front door outside door handle bolts.
Tighten the front door outside door handle bolts to 10 N.m (89 lb in).
5. Install the front door outside handle lockcylinder.
6. Install a NEW outside handle rod-to-lock clip onto the door lock lever.
*
Position the outside door handle rod in the clip to eliminate any free play in the outside door handle.
*
Install the clip cover over the threaded outside door handle rod.
