Impala V6-3.8L SC VIN 1 (2005)
Rear Door Interior Handle: Service and Repair
Door Handle Rod Replacement - Rear Inside (Impala)
Door Handle Rod Replacement - Rear Inside (Impala)
Removal Procedure
1. Remove the rear door trim panel.
2. Remove the rear door water deflector.
3. Remove the rear door inside handle rod from the rear door inside door handle (4).
4. Remove the rear door inside handle rod from the retainer clip (4).
5. Remove the rear door inside handle rods from the door lock (6).
Installation Procedure
1. Install the inside handle rod to the door lock (6).
2. Push in the rear door handle rod in order to secure it.
3. Install the rear door inside handle to the retainer clip (4).