Impala V6-3.8L SC VIN 1 (2005)
1. Install the carpet into the vehicle.
Reach under the carpet and feed the following connectors through the slits in the carpet where required:
*
The power seat adjusters
*
The center console power port
*
The seat belt warning wire connector
2. Install the push-in retainers that secure the carpet on top of the rocker panels.
3. Install the rear quarter lower trim.
4. For the Impala, install the following components:
1. The center pillar lower trim panel.
2. The lower trim panel.
5. Install the front seat carpet retainers.
6. Install the rear seat cushion.
7. Install the front floor center console, if equipped.
8. Install the front seats.
Carpet Retainer Replacement - Front
Carpet Retainer Replacement - Front
Tools Required
J 38778Door Trim Pad Clip Remover
Removal Procedure