Impala V6-3.8L SC VIN 1 (2005)
2. Install the drivers information center module screws.
Tighten the screws to 2 N.m (18 lb in).
Important: When installing the overhead console, apply a foam type tape to the wiring harness to relocate and secure the wiring harness
in the proper position to the headliner.
3. Apply foam tape to the wiring harness at the headliner.
4. Connect the electrical connector to the overhead console.
5. Position the overhead console to the mounting bracket in the headliner.
6. Install the overhead console pressing into place to fully seat the retainers (1).