Impala V6-3.8L SC VIN 1 (2005)
Important: The overhead console retainers are located on the switch side of the assembly.
2. Use a small, flat-bladed tool in order to release the 2 retainers. Press the retainers to the side to release the assembly.
3. Remove the overhead console from the headliner.
4. Disconnect the electrical connectors from the overhead console.
5. Remove the overhead console from the vehicle.
6. Remove the screws from the drivers information center module.
7. Remove the drivers information center module from the overhead console.
Installation Procedure
1. Install the drivers information center module to the overhead console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drivers information center module screws.
Tighten the screws to 2 N.m (18 lb in).
