Impala V6-3.8L SC VIN 1 (2005)
6. If the clip retainer was damaged during the removal of the windshield garnish molding, remove the screw and the retainer from the upper side rail.
INSTALLATION PROCEDURE
1. Install a new clip retainer to the upper side rail, if necessary.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the retainer screw to 2 N.m (18 lb in).
2. Align the garnish molding lower leg to the front door carpet retainer and to the front door weatherstrip.
3. Align the garnish molding to the trough on the upper instrument panel trim panel.
