Impala V6-3.8L SC VIN 1 (2005)
3. Install the caliper (2) over the rotor and onto the caliper bracket (3).
Notice: Refer to Fastener Notice in Service Precautions.
Important: The leading caliper pin, or top bolt, has a bushing as part of the assembly. The trailing caliper pin, or bottom bolt, is a solid design.
4. Install the caliper pin bolts (1). The leading caliper pin bolt, or top bolt, has a bushing as part of the assembly. The trailing caliper pin bolt, or
bottom bolt, is a solid design. Ensure that the bolt boots fit securely in the groove of the caliper pin bolts. If the boots are damaged, they must be
replaced.
^
Tighten the bolts to 95 Nm (70 ft. lbs.).
Important: Install NEW copper brake hose gaskets.
5. Assemble the brake hose bolt (1) and the NEW copper brake hose gaskets (3) to the brake hose (2).