Impala V6-3.8L SC VIN 1 (2005)
2. Important: Ensure that the locking tab and the flanges are in the fully engaged position.
Turn the vacuum brake booster clockwise with a ratchet on the J 22805-B (2). DO NOT use a flat bladed tool in the locking tab to install the
vacuum brake booster. When the vacuum brake booster is correctly installed, the locking tab (1) slides up the flange and engages the locking
notch.
3. Remove the J 22805-B (2) from the installed vacuum brake booster.
4. Install the transmission fluid filler tube bracket retainer and reposition the filler tube.
5. Install the EGR valve.
