Impala V6-3.8L SC VIN 1 (2005)
18. Loosely install the left engine mount bracket bolts to the engine.
Tighten
Tighten the bolts to 102 Nm (75 lb ft).
19. Lower the vehicle.
20. Using the engine support fixture lower the engine.
21. Raise the vehicle.
22. Install the engine mount lower nuts.
Tighten
Tighten the nuts to 43 Nm (32 lb ft).
23. Install the oil level sensor wiring harness and the oil level sensor wiring harness bolt to the engine.
Tighten
Tighten the bolt to 10 Nm (89 lb in).
24. Connect the oil level sensor electrical connector.
