Impala V6-3.8L SC VIN 1 (2005)
5. Install the new right exhaust manifold gasket.
6. Install the right exhaust manifold.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the right exhaust manifold bolts and the nuts.
^
Tighten the bolts and the nuts to 30 Nm (22 ft. lbs.).
8. Install the fuel injector sight shield bracket.
9. Install the fuel injector sight shield bracket nuts.
^
Tighten the nuts to 30 Nm (22 ft. lbs.).
10. Install the right engine lift bracket.
11. Install the right engine lift bracket bolt and the nut.
^
Tighten the bolt and the nut to 30 Nm (22 ft. lbs.).
