Impala V6-3.8L SC VIN 1 (2005)
2. Install the high mounted stoplamp pressing in until the retainers are fully seated.
3. Install the screws to the high mounted stoplamp.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the high mounted stoplamp screws to 2 N.m (18 lb in).
4. Install the high mounted stoplamp bracket.
5. Install the screw to the high mounted stoplamp bracket.
Tighten the high mounted stoplamp bracket screw to 2 N.m (18 lb in).
6. Close the rear compartment.
