Impala V6-3.8L SC VIN 1 (2005)
2. Install the wheel bearing/hub and park brake assembly to the knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the wheel bearing/hub-to-knuckle bolts.
Tighten the bolts to 75 Nm (55 ft. lbs.).
4. Install the park brake cable to the park brake actuator.
Rear Wheel Speed Sensors
5. Install the ABS electrical connector to the wheel speed sensor (1), if equipped.
6. Install the brake rotor.
7. Install the tires and wheels.
8. Lower the vehicle.
