Impala V6-3.8L SC VIN 1 (2005)
16. Install the fuel tank filler hose to the fuel tank.
17. Fully seat the filler hose (4) on the fuel tank port (2).
18. Ensure the clamp (1) is properly located on the tank port between the bead (5) and the tank (3).
Tighten the fuel tank filler pipe hose clamp to 2.5 N.m (22 lb in).
19. Install the exhaust pipe hangers.
20. Lower the vehicle.
21. Add fuel and install the fuel filler pipe cap.
22. Connect the negative battery cable.
23. Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition, for 2 seconds.
2. Turn OFF the ignition, for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
