Impala V6-3.8L SC VIN 1 (2005)
8. Remove the accelerator cable from the accelerator cable bracket.
9. Remove the piece of mechanics wire from the cable.
IMPORTANT: Note the routing of the accelerator cable for removal.
10. Remove the accelerator cable from the vehicle.
INSTALLATION PROCEDURE
1. Attach the mechanics wire to the new cable.
NOTE: Do not route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be
securely fastened. This is necessary in order to prevent possible interference and damage to the component.
2. Install the accelerator cable to vehicle using the routing verified during removal.
3. Install the accelerator cable through the cowl.
4. Remove the mechanics wire from the cable.
