Impala V6-3.8L SC VIN 1 (2005)
Hazard Warning Switch: Service and Repair
Emergency Vehicle Interior Switch Replacement
EMERGENCY VEHICLE INTERIOR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the trim plate bezel from the instrument panel (I/P) cluster.
2. Remove the headlamp switch assembly screws.
3. Pull the headlamp switch assembly from the I/P.
4. Disconnect the electrical connector from the emergency vehicle interior switch.
5. Remove the emergency vehicle interior switch from the back of the headlamp switch assembly.
INSTALLATION PROCEDURE
1. Install the emergency vehicle interior switch through the back of the headlamp switch assembly by pressing the switch into place until fully seated.
