Impala V6-3.8L SC VIN 1 (2005)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor Replacement
CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the right splash shield cover.
4. Remove the crankshaft balancer.
5. Disconnect the crankshaft position (CKP) sensor electrical connector.
6. Remove the CKP sensor shield (1).
7. Remove the CKP sensor bolts.
8. Remove the CKP sensor.
INSTALLATION PROCEDURE