Impala V6-3.8L SC VIN 1 (2005)
1. Install the coil spring and upper strut mount to the J 45400.
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the strut to the coil spring and upper strut mount.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the strut retaining nut.Using the J 42991 and a 45 TORX socket, install the strut mount nut.
Tighten the strut mount nut to 85 Nm (63 ft. lbs.).
5. Remove the strut from the J 45400.
6. Install the strut to the vehicle.