Impala V6-3.8L SC VIN 1 (2005)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the strut upper nuts.
Tighten the strut upper nuts to 33 Nm (24 ft. lbs.).
3. Install the strut lower bolts and nuts.
Important: This is a prevailing torque type fastener. This fastener may be reused ONLY if:
^
The fastener and its counterpart are clean and free from rust.
^
The fastener develops 3 Nm (27 inch lbs.) of torque/drag against its counterpart prior to the fastener seating.
If the fastener does not meet these criteria, REPLACE the fastener.
4. Align the strut to the mark on the knuckle.
Tighten the strut lower nuts to 122 Nm (90 ft. lbs.).
5. Install the tire and wheel.
6. Lower the vehicle.
7. Align the front wheels.
Suspension Shock/Strut Disposal
Suspension Shock/Strut Disposal
Caution: Use the proper eye protection when drilling to prevent metal chips from causing physical injury.
