Impala V6-3.8L SC VIN 1 (2005)
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil pump body and cover bolts (206,207).
^
Tighten the bolts (207) to 12 Nm (106 inch lbs.).
^
Tighten the bolts (206) to 16 Nm (12 ft. lbs.).
6. Reposition and connect the electrical connectors to the:
^
Automatic transaxle fluid pressure manual valve position switch assembly (395)
^
2 - 3 Shift solenoid valve assembly (315B)
^
If equipped internal mode switch
7. Install the case side cover.
