chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Coaxial Cable Replacement - Digital Radio|Page 7792 > < Coaxial Cable Replacement - Digital Radio
Page 2
background image

1. Install the antenna cable retainers to the receiver bracket.
2. Connect the antenna cable to the digital radio receiver.
3. Attach the wire or string used in the removal procedure to the cable being installed.
4. Carefully pull the antenna cable through the rear shelf into the passenger compartment.
5. Install the right rear compartment trim panel.
6. Remove the wire or string from the antenna cable.
7. Route the antenna cable between the dome lamp harness and the upper quarter panel.

8. Install the antenna cable to the dome lamp harness clips.
9. Install the antenna cable retainer (3) to the rear header (2).

10. Connect the antenna cable to the antenna base cable connector.
11. Install the antenna cable mastic patch/tape at the roof.
12. Install the rear of the headliner.
13. Install the right rear upper quarter trim panel.

Coaxial Cable Replacement - Digital Radio|Page 7792 > < Coaxial Cable Replacement - Digital Radio