Impala V6-3.8L VIN K (2004)
Front Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Front Bumper (Impala)
Fascia Replacement - Front Bumper (Impala)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the front fender liners.
2. Remove the headlamps.
3. Remove the fog lamps, if equipped.
4. Remove the nuts from the front bumper fascia at the fender.
5. Remove the push-in retainers from the upper front bumper fascia support using J 38778.
6. Remove the screws from the front bumper fascia at the lower support.
7. Remove the front bumper fascia from the vehicle.
8. Remove the grille from the front bumper fascia.
9. Remove the front bumper fascia outer support.
Installation Procedure