Impala V6-3.8L VIN K (2004)
3. Using new plastic rivets, install the plastic rivets to the lower rear end of the rear fascia extension.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the rear bumper fascia extension lower screw to the lower rear fascia and splash shield.
Tighten the rear bumper fascia extension lower screw to 2 N.m (18 lb in).
5. Using a new plastic rivet, install the plastic rivet to the rear fascia extension corner to the splash shield.
6. Install the rear bumper fascia extension screw to the rear fascia extension corner to the splash shield.
Tighten the rear bumper fascia extension screw to 2 N.m (18 lb in).
7. Install the rear wheels and tires.
8. Lower the vehicle.