Impala V6-3.8L VIN K (2004)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front door lock screws in the proper fastener tightening sequence: top (1), bottom (2), middle (3).
Tighten the front door lock screws to 10 N.m (89 lb in).
5. Install a NEW outside handle rod-to-lock clip onto the front door lock lever.
1. Position the front door outside door handle rod in the clip to eliminate any free play in the front door outside door handle.
2. Install the clip cover closed over the threaded front door outside door handle rod.
6. Install the clip to the front door inside handle rods.
7. Install the front door handle rods to the handle.
8. Install the front door water deflector.
9. Install the front door trim panel.
10. Inspect the door lock system for the proper operation.
