Impala V6-3.8L VIN K (2004)
6. Remove 2 screws from the door pull handle bracket.
7. Remove the front door trim panel using J 38778 in order to disengage the fasteners from the door inner panel.
8. Remove the upper door trim panel from the front door.
INSTALLATION PROCEDURE
IMPORTANT: Before installing the front door trim panel to the front door inner panel, the old trim panel retainers MUST be discarded and replaced
with NEW trim panel retainers.
1. Install the upper door trim panel to the front door.
2. Install the screw to the upper door trim panel.
3. Install the front door trim panel to the inner door panel.
4. Install 2 screws to the door pull handle bracket.
