Impala V6-3.8L VIN K (2004)
Hood Weatherstrip: Service and Repair
Seal Replacement - Plenum to Hood
Seal Replacement - Plenum to Hood
Removal Procedure
1. Open the hood.
2. Remove the right side of the air inlet grille.
3. To remove the seal from the pinch-weld flange, start at the passenger side corner of the seal and pull forward and off of the pinch-weld flange.
Installation Procedure
1. Align the seal to the pinch-weld flange.
2. Press to install the seal to the pinch-weld flange, start at the passenger side corner and work toward the center of the car.
3. Install the right side of the air inlet grille.
4. Close the hood.