Impala V6-3.8L VIN K (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement
GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR (IMPALA)
REMOVAL PROCEDURE
1. Remove the windshield garnish molding from the clip retainers on the upper side rail.
2. Slide the roof leg of the garnish molding out from under the center pillar trim panel.
3. Remove the garnish molding from the windshield pillar.
4. Remove the garnish molding lower leg from the front door carpet retainer by pulling up and back.