Impala V6-3.8L VIN K (2004)
6. Align the trim panel to the clip retainers on the roof side rail.
7. Install the trim panel by applying upward pressure to the retainer locations until fully seated.
8. Install the rear seat back.
Trim Panel Replacement - Rear Quarter Upper (Impala)
Trim Panel Replacement - Rear Quarter Upper (Impala)
Removal Procedure
1. Remove the rear seat back.
2. Reposition the rear seat belt from the trim panel.
3. Pull down on the trim panel to disengage the clip retainers on the roof side rail.
4. Pull out to disengage the clips located at the bottom of the triangular window.
5. Slide the roof leg out from under the upper trim panel of the center pillar.