Impala V6-3.8L VIN K (2004)
-
Tighten the bolts to 10 Nm (89 inch lbs.).
12. Install the transmission oil cooler lines to the retainer clip at the bottom of the cooling fan shroud.
13. Install the air cleaner assembly.
14. Install the right and left engine mount struts. Refer to the following procedures:
-
Engine Mount Strut Replacement - Right
-
Engine Mount Strut Replacement - Left
-
Engine Mount Strut Replacement - Right
-
Engine Mount Strut Replacement - Left
15. Connect the negative battery cable.
16. Inspect for proper operation.